Alpine DVA-5205E owner manual Turning the power on and off

Turning the power on and off

		N
	LD
O
V

VOL

UP

Turning the power on and off

Press “POWER”.

The power turns on.

POWER

NTSC/PAL

When connected with an Alpine

Caution head unit

If the DVA-5205E is connected to anything other than the CVA-1005E/IVA- C800E, the default DVD setting must be changed. See page 36, “Custom setting – Changing the Ai-NET settings” to change the SETUP to CD mode and see page 38, “Custom setting – Changing the H.U. CONTROL settings” to change the SETUP to ON mode before using it.

	To turn the power off, press
POWER
	“POWER” again.
NTSC/PAL
	Notes:
Play Position Memory Function	• With this unit connected to an Ai-NET compatible
	head unit, there will be about a 3 second delay
• Even if you turn power off or switch the	during power-up from the remote control. This is
Ignition Key to OFF during playback or	caused by the systems communications being
change the video source, playback will	carried out by the various components and is not
continue from the point where playback	a defect.
	• When connected with an Ai-NET compatible head
stopped when the power is turned ON
	unit, the power cannot be turned off from the
again.	remote control unit. Turn off the DVA-5205E’s
The play position memory is released if	power by switching the head unit’s source. For
the disc is removed or the Reset switch	details, refer to “Operating from the head unit”
is pressed.	(page 56).
• Reading this manual

Tips

Stopping playback			These indicate the discs for which
Stopping	DVD		the function can be used.
		Video CD
playback		CD
			DVD ...DVDs

Press the stop button during playback to stop playback. That position is stored in the memory.

Press “ L” during playback. CHG

• Using the PRE-STOP function (DVD, Video CD only)

Tips When the PRE-STOP function is used, the position at which playback is stopped is stored in the memory, and playback resumes from that position.

Press “ L” once during playback.

“PRE-STOP” is displayed.

Video CD ...Video CDs

CD ...Music CDs

This indicates supplementary explanation of operation of this system.

CHG

Press “ :” in the PRE-STOP mode.

Playback starts from the position at which it was stopped.

10