Alpine DVA-5205E owner manual Changing the digital output setting, Selection, then press ENT

SET UP

Changing the digital output setting

ENT

DISP MENU SET

Changing the digital output setting

Use the following procedure to set the audio signal output from the DVA-5205E.

Select “DIGITAL OUT” under “Changing the default settings (SET UP)” on page 24.

BAND	Use the “Joystick” to make the
RTN	selection, then press “ENT”.
V.OUT

ENT

ENT

AUTO

The digital output is switched automatically according to the type of audio signals being played.

Be sure to select “AUTO” when you want to connect a digital audio processor and play Dolby Digital audio. “AUTO” is selected upon shipment from the factory.

LPCM

The audio signals recorded on the disc are converted into 48 kHz/16 bit (for DVDs) or 44.1 kHz (for video CDs and CDs) linear PCM audio signals for output.

32