35-EN
Memorizing Divider Settings
You can store your settings of the divider(s) in
memory when you have adjusted them.
1After adjusting the divider(s), display the Divider
mode screen.
Press and hold any one of the Function buttons
1 (P.SET1) through 4 (P.SET4) for at least 2
seconds.
The indicators for the 4 buttons blink for 5
seconds.
2While the indicators are still blinking, press the
Function button into which you want to
memorize (preset) the divider settings.
Repeat the above steps to memorize 3 other
divider settings.
Recalling Memorized Divider
Settings Using Function Buttons
1Display the Divider mode screen.
Press the Function button 1 (P.SET1) through
4 (P.SET4) that has your desired divider
settings.
The divider setting stored at the Function button
will be recalled.
Tip
You can also recall your desired divider settings
memorized by pressing the 4 (;P.DN) or 5 (:P.UP)
button in the Divider mode.
Recalling Divider Settings
Memorized Using Optional Divider
If an optional Alpine divider (such as PXA-H600/
PXA-H510) is connected, you can recall the
settings memorized using the optional divider.
1Press the SOURCE button.
The main menu is displayed on the display.
2Press the 4 (A.PROC) button.
The Audio Processor List screen is displayed.
3Rotate the rotary encoder and select "Adaptive
EQ." The Function Guide screen is displayed.
4Press the Function button 1 (P.SET1) through
6 (P.SET6) that has your desired setting
memorized using the optional divider.
5Press the FUNC (RETURN) button.
The display returns to the main menu screen.
Memorizing Characteristic Curves
Equalization characteristic curves created by
yourself or factory preset can be stored in
memory. (See page 27.)
1Select one of the factory preset characteristic
curves or make your own (personal)
characteristic curve. Then, display the Audio
Processor List and select "Private Memo."
2Press and hold any one of the Function buttons
1 (P.SET1) through 6 (P.SET6) for at least 2
seconds.
The Function Guide indicators P.SET1 through
P.SET6 in the preset mode display blink
indicating that you can memorize the
characteristic curve.
3While the Function Guide indicators are blinking,
press the Function button 1 (P.SET1) through
6 (P.SET6) into which you wish to memorize the
characteristic curve.
Now, the characteristic curve has been
memorized.
Repeat this procedure to memorize other
characteristic curves.
NOTE
This unit can memorize curves together with the settings
of the equalizer, DHE, BBE and Surround Time
Correction.