Alpine IVA-C801 40

40-EN

Adjusting Subwoofer Level

(when subwoofer is used with

other speakers)

To display the initialization mode screen:

To watch a video source, your vehicle must be

parked with the ignition key in the ACC or ON

position. To do this, follow the procedure below.

1.Push the foot brake to bring your vehicle to a

complete stop at a safe location. Engage the

parking brake.

2.Keep pushing the foot brake and release the

parking brake once then engage it again.

3.While the parking brake is being engaged the

second time, release the foot brake.

NOTE

For automatic transmission vehicles, place the transmission

lever in the Park position.

Now, the locking system for the initialization mode

operation has been released. Unless the ignition

key is turned to the OFF position, the initialization

mode can be activated by engaging the parking

brake without performing the above procedure (1

through 3).

Each time the ignition key is turned to the OFF

position, perform the above procedure.

1Press the SOURCE button.

The main menu appears on the display.

2Press the 6 (SETUP) button.

The Setup mode screen is displayed.

3Rotate the rotary encoder and select "Sub wf."

The Function Guide appears on the display.

4Press the 2 (ON) button to turn on the

subwoofer.

To turn off the subwoofer, press the 1 (OFF)

button.

5Press the rotary encoder repeatedly to select

"SUB W." Each press changes the modes as

follows:

→ SUB.W. → BAS. → TRE. → BAL. → FAD. → VOL.

6Rotate the rotary encoder and adjust the

subwoofer output level.

7When your adjustment has been completed,

press the FUNC (RETURN) button.

The display returns to the main menu.

NOTES

•For further information, please contact your Alpine

dealer.

•When you connect a subwoofer, you need an amplifier

with built-in low-pass filter.∗

∗The low-pass filter passes only the frequencies

below the selected cut-off frequency. Any high

frequency content of the audio signal above the cut-

off will be removed.

•With the Setup screen displayed, pressing and rotating

the rotary encoder can adjust the volume level.

•Immediately after inputting titles or changing the

settings of Setup Mode or Display Mode (While the

system is inputting the titles or data automatically) do

not turn the ignition key (engine key) to OFF.

Otherwise, the title may not be written, or the settings

may not be changed.

Other Useful Features

(IVA-C801) (CVA-1006)

Rotary encoder Rotary encoder

SOURCE

FUNC 23 FUNC

SOURCE