Alpine IVA-C801 owner manual 32

32-EN
Audio Processor Operation (Optional)
Adjustment of Time Correction
Value
1Press the SOURCE button.
The main menu appears on the display.
2Press the 4 (A.PROC) button.
The Audio Processor List appears.
3Rotate the rotary encoder and select the "Time-
Corr." (Time-Correction), then press the rotary
encoder.
The display changes to the Time-Correction
mode screen.
4Press and hold the FUNC (RETURN) button for
at least 2 seconds.
The display changes to the Time-Correction
Adjustment mode screen.
5Press the rotary encoder repeatedly to select the
position (seat) you wish to adjust.
Each press changes the seat positions as
follows:
→ Fr/Left → Fr/Righ → Rear/Left → Rear/Right
6Rotate the rotary encoder clockwise or
counterclockwise to increase or decrease the
Time-Correction value respectively to your
desired value.
7When adjustment has been completed, press the
FUNC (RETURN) button. The display returns to
the Time-Correction mode screen.
Tip
When the FUNC (RETURN) button is pressed, the
display returns to the previous screen.
Adjusting Cross-Over (X-Over)
Point of 2-Way Divider
If an optional Alpine Channel Divider PRA-H400
is connected, you can control the Divider from the
IVA-C801/CVA-1006.
Use this procedure when one or two 2-way-
system or 3-way system channel dividers are
connected.
1Press the SOURCE button.
The main menu screen appears on the display.
2Press the 4 (A.PROC) button.
The display shows the Audio Processor list
screen.
3Rotate the rotary encoder and select the
"Divider" (when one divider is connected) or
"Divider-F and Divider-R" (when two dividers are
connected), then press the rotary encoder to
execute the selection.
The display changes to the Divider mode screen.
4Press and hold the FUNC (RETURN) button for
at least 2 seconds.
The mode changes to the Divider Adjustment
mode.
5Press the 1 (X-OVER) button.
The mode changes to the Cross-Over
Adjustment mode.
(IVA-C801) (CVA-1006)
SOURCE
SOURCE Rotary encoder Rotary encoder
1FUNC 1FUNC 66 44 22