33-EN
→
→
→
→
→
→

Adjusting Levels

1Press and hold the FUNC (RETURN) button for
at least 2 seconds in the Divider mode.
The mode changes to the Divider Adjustment
mode.
2Press the 2 (LEVEL) button. The mode changes
to the Level Adjustment mode.
3Press the rotary encoder and select the channel
you wish to adjust.
Each press changes the channels as follows:
When only one 2-way system divider is
connected:
→ L-Low → R-Low → F-High/L
R-High/R ← R-High/L ← F-High/R ←
When two 2-way system dividers are
connected:
→ L-Low → R-Low → L-High → R-High
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment, and Rear adjustment modes,
and the display also changes.
→ L-Low → R-Low → L-High → R-High
When only one 3-way divider is connected:
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
When two 3-way dividers are connected:
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
4Rotate the rotary encoder clockwise or
counterclockwise to adjust to your desired level
upward or downward respectively.
5When adjustments have been completed, press
the FUNC (RETURN) button.
The display returns to the Divider mode.
→
→
6Press the rotary encoder and select the channel
that you wish to adjust.
Each press changes the channel as follows.
When only one 2-way divider is connected:
→ Low → F-High → R-High
When two 2-way dividers are connected:
→ Low → High
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
→ Low → High
When only one 3-way divider is connected:
→ Low → Mid-L → Mid-H → High
When two 3-way dividers are connected:
→ Low → Mid-L → Mid-H → High
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment, and the
display also changes.
→ Low → Mid-L → Mid-H → High
7Rotate the rotary encoder clockwise or
counterclockwise to adjust the Cross-Over point
upward or downward to your desired point.
8When the adjustment has been completed, press
the FUNC (RETURN) button. The display returns
to the Divider mode screen.