Installation and Connections

Before installing or connecting the unit, please read the following and pages 5 to 7 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wires insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

•Be sure to disconnect the cable from the (–) battery post before installing your IVA-D105. This will reduce any chance of damage to the unit in case of a short-circuit.

•Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle’s electrical system.

•When making connections to the vehicle’s electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the IVA-D105 to the fuse box, make sure the fuse for the intended circuit of the IVA-D105 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer.

•The IVA-D105 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance.

•Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

•The Display must be completely retracted in the casing when installing. If it is not, problems may occur.

•When installing in automobiles, make sure the Display can open/close without coming in contact with the gear shift.

IMPORTANT

SERIAL NUMBER:

 

 

 

 

 

Please record the serial number of your unit in the space provided

INSTALLATION DATE:

 

 

 

 

below and keep it as a permanent record. The serial number plate is

INSTALLATION TECHNICIAN:

 

 

located on the bottom of the unit.

PLACE OF PURCHASE:

 

 

 

 

 

 

 

 

 

73-EN

Page 74 Page 76
Page 75
Image 75
Alpine IVA-D105 owner manual Installation and Connections, 73-EN
Page 74 Page 76

IVA-D105 specifications

The Alpine IVA-D105 is an advanced in-dash multimedia receiver designed to enhance the driving experience with its cutting-edge features and technologies. Notably, this model integrates a large, high-resolution LCD touchscreen display, which is intuitive to use and supports a visually appealing interface. The screen's size and clarity make it easy for drivers to navigate through its various functions without taking their focus off the road.

One of the standout features of the IVA-D105 is its multimedia playback capabilities. It supports a wide range of formats including CDs, DVDs, and various digital audio formats, allowing users to enjoy their favorite music and videos effortlessly. Additionally, the unit is equipped with USB connectivity, which enables direct playback from USB flash drives, providing convenience for users who want to access a vast library of music files.

Moreover, the Alpine IVA-D105 is compatible with Bluetooth technology, allowing for hands-free calling and audio streaming from compatible mobile devices. This feature promotes safety while driving, as it minimizes distractions and keeps the driver's hands on the wheel.

In terms of connectivity, the IVA-D105 also features multiple inputs and outputs, including AV inputs for connecting external devices such as gaming consoles or additional media players. With built-in support for steering wheel controls, drivers can easily manage their audio and navigation without needing to take their eyes off the road.

The unit’s customizable sound settings are another highlight. Users can fine-tune their audio experience by adjusting bass, treble, and balance settings to achieve the perfect sound profile that suits their preferences. The built-in equalizer allows for further personalization, making it a versatile option for audiophiles.

Moreover, the Alpine IVA-D105 is designed with a sleek aesthetic that fits seamlessly into the dashboards of many vehicles. Its modern design and user-friendly interface make it a desirable upgrade for those looking to enhance their vehicle's entertainment system.

Overall, the Alpine IVA-D105 delivers exceptional multimedia performance with a blend of advanced technologies, user-friendly features, and great sound quality, making it a notable choice for anyone looking to elevate their in-car experience.
Top Page Image Contents