Alpine KCA-420i Operation, Turning Power On and Off, Recalling the iPod mode, Adjusting Volume

Operation

By using this adapter, an iPod or iPod mini is controled from an Alpine Ai-NET head unit. The following table shows which head units can be used for this purpose.

(Ai-NET compatible head unit sold as of January 2004)

	CDA-9835	CD Head Unit	CDA-9825
	CDA-9833		CDA-9820XM
CD Head Unit	CDA-9831		IVA-D300
	CDA-9830	Audio/Visual	IVA-D901
	CDA-9827	Head Unit	CVA-1004
	CDA-9826

For operation using an Alpine Ai-NET head unit sold as of January 2005, refer to the head unit’s Owner’s Manual.

All of the iPod’s buttons are disabled when connected to this adapter. Perform the operation from the head unit.

Operation of the iPod from the Ai-NET head units shown in the table above, closely follows the MP3 compatible CD changer operation. For details, refer to the Owner’s Manual of the head unit.

For each function, refer to the iPod’s documentation.

Turning Power On and Off

1 The iPod power turns on as soon as it is connected to this adapter.

As soon as the iPod is connected, power is automatically turned on as long as the vehicle’s ignition is ON or in ACC mode. The head unit’s power does not have to be on.

The iPod’s power can be turned OFF after removing the iPod from the adapter. When the iPod is left connected to the adapter, power is automatically turned off when the vehicle’s ignition key is turned OFF. (The iPod is paused and goes into sleep mode about 2 minutes later.)

•While the iPod is connected to the adapter, the power cannot be turned on or off from the iPod.

•“OK to disconnect” is shown in the iPod’s display while it is connected to the adapter.

•While connected to the adapter, the iPod is charged as long as the vehicle’s ignition key is turned to ACC or ON.

Recalling the iPod™ mode

•The iPod mode is displayed in the same way as the CD changer mode.

•If using the iPod with a changer, the Versatile Link Terminal (KCA-410C) must be used. In this case, press BAND to select the changer mode applicable to the iPod.

Controling from the CDA-9835/CDA-9833/ CDA-9831/CDA-9830/CDA-9827/CDA-9826/CDA- 9825/CDA-9820XM/CVA-1004 models

1 Press SOURCE/POWER or SOURCE/PWR

to switch to the CD changer mode.

The iPod is controllable from the head unit in the CD changer mode.

Controling from the IVA-D901 model

1 Press SOURCE/POWER to display the main menu.

2 Turn the Rotary encoder to select “CD CHG,” then press the Rotary encoder.

The display changes to the CD changer mode screen, then the iPod can be controled.

Controling from the IVA-D300 model

1 Touch [SRC] on the main source screen.

The source selection screen is displayed.

2 Touch [CD CHG].

The display changes to the CD changer mode screen, then the iPod can be controled.

Adjusting Volume

1 Turn the Rotary encoder until the desired sound is obtained.

6-EN