Yamaha YDP-113 owner manual Midi Master Volume, General Midi Mode On, Universal Realtime Message

4. PROGRAM CHANGE

Data format: [CnH] -> [ppH]

CnH = Program event (n = channel number) ppH = Program change number

P.C.#=Program Change number

YDP-113	MSB	LSB	P.C.#
Grand Piano 1	0	122	1
Grand Piano 2	0	112	1
E.Piano 1	0	122	6
E.Piano 2	0	122	5
Harpsichord 1	0	122	7
Harpsichord 2	0	123	7
Vibraphone	0	122	12
Church Organ 1	0	123	20
Church Organ 2	0	122	20
Strings	0	122	49

•When program change reception is turned OFF in the Func- tion mode, no program change data is transmitted or received. Also, Bank MSB/LSB is not transmitted or received.

•When you specify a program change as a number in the range of 0-127, specify a number that is one less than the program change number listed above. For example, to specify program change number 1, you would specify program change 0.

5.SYSTEM REALTIME MESSAGES

[rrH]

FEH: Active sensing

Data	Transmission	Reception
		If a signal is not received via MIDI for
		more than 400 milliseconds, the
FEH	Transmitted every	same processing will take place for
	200 milliseconds	All Sound Off, All Notes Off and Reset
		All Controllers as when those signals
		are received.

•Caution: If an error occurs during MIDI reception, the Damper, Sostenuto, and Soft effects for all channels are turned off and an All Note Off occurs.

6.SYSTEM EXCLUSIVE MESSAGES (Universal System Exclusive)

(1) Universal Realtime Message

Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] -> [llH] -> [mmH] -> [F7H]

MIDI Master Volume

•Simultaneously changes the volume of all channels.

•When a MIDI master volume message is received, the volume only has affect on the MIDI receive channel, not the panel master volume.

F0H = Exclusive status 7FH = Universal Realtime 7FH = ID of target device

04H = Sub-ID #1=Device Control Message

01H = Sub-ID #2=Master Volume llH = Volume LSB

mmH = Volume MSB F7H = End of Exclusive

or

F0H = Exclusive status 7FH = Universal Realtime

XnH = When n is received n=0~F, whichever is received. X = don’t care

04H = Sub-ID #1=Device Control Message

01H = Sub-ID #2=Master Volume llH = Volume LSB

mmH = Volume MSB F7H = End of Exclusive

(2) Universal Non-Realtime Message (GM On)

General MIDI Mode On

Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] ->

	[F7H]
F0H =	Exclusive status
7EH =	Universal Non-Realtime
7FH =	ID of target device
09H =	Sub-ID #1=General MIDI Message
01H =	Sub-ID #2=General MIDI On
F7H =	End of Exclusive
or
F0H =	Exclusive status
7EH = Universal Non-Realtime
XnH =	When received, n=0~F.
	X = don’t care
09H =	Sub-ID #1=General MIDI Message
01H =	Sub-ID #2=General MIDI On
F7H =	End of Exclusive

When the General MIDI mode ON message is received, the MIDI system will be reset to its default settings.

This message requires approximately 50ms to execute, so sufficient time should be allowed before the next message is sent.

YDP-113Appendix/Anhang/Annexe/Apéndice 35