Connections
Before setting MultEQ, connect all other devices.
1
2
3
4
Install the
After Installing the unit, make sure that sound is output from each speaker.
Press the OPEN button to open the front panel, then slide it in the left direction A, and pull out towards you B to remove.
Connect the Head Unit Connection Cable, USB Cable and Microphone to the Interface Box.
5
6
Connect the USB Cable to a USB port of your PC.
Connect the Head Unit Connection Cable to the connector of the
USB Cable | Head Unit Connection Cable |
Interface Box
Sound Characteristics Measurement Microphone
•Be sure to connect the cable to the
7 Check all connections, start the MultEQ setting.