Connections
Cautions on wire lead connections
•Use Power Supply wire sold at your dealer’s store.
•Refer to the description below for the proper procedure.
If you are in doubt about how to make this connection, consult your dealer.
1Check the wire size.
NOTES:
•Wire Size (Battery Lead, Ground Lead): Recommended wire size for this unit is AWG4 or larger.
•Wire Size (Remote
Recommended wire size for this unit is AWG8 – AWG14.
•If the wire gauge used is unknown, ask your dealer.
2Remove the insulation from the ends of the wire leads by about 7 – 10mm (9/32"
– 3/8"). (Fig. 7)
NOTES:
•If length of the exposed wire is too short, a poor connection may occur causing operation failure or sound interruption.
•On the other hand, if the length is too long, an electrical
7 – 10 mm (9/32" – 3/8")
Lead end side of the product
Fig. 7
