To Reset DEFAULT Settings
This option allows you to restore some or all default settings. LOCAL resets VOLUME, BASS and TREBLE to the default settings.
FACTORY restores all options to the default settings. FM presets are also erased.
1.Select DEFAULT from the menu.
2.Press the VOLUME +/– key to scroll through the defaults – FACTORY or LOCAL.
3.Press INPUT to select one of the options.
The following list shows the factory settings:
1.RF Channel = AUTO
2.Bass = 0
3.Treble = 0
4.FM Mode = US
5.FM Presets = 87.5
6.Input = iPod
7.Volume = 60
Specifications
Type | Description |
Wireless Speaker
17.9x 4.5 x 10 inches
(457 x 115 x 255 mm)
Dimensions (W x D x H)
Transmitter Base
4.7x 5.2 x 1.2 inches (120 x 132 x 31 mm)
Power Output | 40 | Watts continuous per channel | |
80 | Watts continuous/160 peak (total) | ||
| |||
|
| ||
90 dB (“A” weighted) | |||
|
|
| |
Frequency Response (System) | 42 | Hz – 22 kHz (+/– 10 dB) | |
|
| ||
Wireless Transmission Type | 2.4 GHz digital transmission for stereo audio | ||
|
| ||
Wireless Transmission Range | Range of approximately 100 feet (30 meters) | ||
|
| ||
Speakers | Two | ||
|
| ||
Remote Control | Full function, infrared | ||
|
| ||
| Wireless Speaker | ||
| AC (as indicated on rear of speaker) | ||
Power Source |
|
| |
|
| ||
Transmitter Base
9 VDC/1.6A (from supplied AC adapter)
FCC Statement
CAUTION: User changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
•Select a different channel.
9
