Altinex MT113-102/103 VTLYGkUi, LOD0CnUi, LOD1CnUi, LOD1GkUi, LOD0GkUi, MUT0CnUi, MUT1CnUi, Clr

MULTI-TASKER

n = Card ID number (n = slot # from 1 to 19) i = Unit ID number (i = 0 to 9)

Example:

If the status of audio card 2 of unit zero is as follows:

VOLIN1:2

VOLIN2:12

VOLIN3:18

VOLOUT:8

BASS:8

TREBLE:14

LOUDNESS:ON

After sending a command [VTL2CnUi] on request [C2] we will the new status of card 2: VOLIN1:2

VOLIN2:12

VOLIN3:18

VOLOUT:8

BASS:8

TREBLE:2

LOUDNESS:ON

[VTLYGkUi]

This command sets absolute treble level for a group of cards. Command Format: [VTLYGkUi] Y = Absolute treble level (Y = 0 to F in hex format)

k = group number (k = # from 1-9) i = Unit ID number (i = 0 to 9)

Example:

If card 1, 2, and 3 are grouped as group 5 of unit 1, send the [VTLFG5U1] command to set maximum volume of treble for card 1, 2, and 3 simultaneously.

12. [LOD0CnUi]

This command turns OFF loudness feature for single card.

n = Card ID number (n = slot # from 1 to 19) i = Unit ID number (i = 0 to 9)

[LOD1CnUi]

This command turns ON loudness feature for group of cards simultaneously.

n = Card ID number (n = slot # from 1 to 19) i = Unit ID number (i = 0 to 9)

13

[LOD1GkUi]

This command turns ON loudness feature for single card.

k = group number (k = # from 1-9) i = Unit ID number (i = 0 to 9)

[LOD0GkUi]

This command turns OFF loudness feature for group of cards simultaneously.

k = group number (k = # from 1-9) i = Unit ID number (i = 0 to 9)

13. [MUT0CnUi]

This command turns ON speaker output.

n = Card ID number (n = slot # from 1 to 19) i = Unit ID number (i = 0 to 9)

14. [MUT1CnUi]

This command turns OFF speaker output. n = Card ID number (n = slot # from 1 to 19) i = Unit ID number (i = 0 to 9)

15. [WR….GkUi]

This command groups multiple cards in the MT100-100 Enclosure. Each unit contains a maximum of nine groups. Command Format: [WRCn…GkUi]

n = card ID No. (n = slot # from 1 to 19) k = group number (k = # from 1-9)

i = unit number (i = # from 0-9)

Example:

To group card #1, 2, and 3 as group 5 of unit #1, send the [WRC1C2C3G5U1] command. After executing this command, cards 1, 2, and 3 of unit 1 will be grouped together as group 5.

16. [CLR]

This command clears the members for a single group or for all nine groups. Command Format: [CLRGkUi]

k = group number (k = # from 1-9) i = unit number (i = # from 0-9)

Example:

To clear group #1, send the [CLRG1U1] command. This command clears the members for the specified group only.

13