Altinex MT113-102/103 manual VBLyCnUi, VBLyGkUi, SELTCnUi, SELTGkUi, VTLyCnUi

MULTI-TASKER

If card 1, 2, and 3 are grouped as group 5 of unit 1, send the [SELB1G5U1] [–] [–] [–] command to decrease the volume for card 1, 2, and 3 simultaneously.

9. [VBLyCnUi]

This command sets absolute bass level for single card. Command Format: [VBLyCnUi] y = Absolute bass level (y = 1 to 15)

n = Card ID number (n = slot # from 1 to 19) i = Unit ID number (i = 0 to 9)

Example:

If the status of audio card 2 of unit zero is as follows:

VOLIN1:2

VOLIN2:12

VOLIN3:18

VOLOUT:8

BASS:8

TREBLE:14

LOUDNESS:ON

After sending a command [VBL2CnUi] on request [C2] we will the new status of card 2: VOLIN1:2

VOLIN2:12

VOLIN3:18

VOLOUT:8

BASS:2

TREBLE:14

LOUDNESS:ON

[VBLyGkUi]

This command sets absolute bass level for a group of cards. Command Format: [VBLyGkUi] y = Absolute bass level (y = 1 to 15)

k = group number (k = # from 1-9) i = Unit ID number (i = 0 to 9)

Example:

If card 1, 2, and 3 are grouped as group 5 of unit 1, send the [VBLFG5U1] command to set maximum volume of bass for card 1, 2, and 3 simultaneously.

10. [SELTCnUi]

This command sets path to adjust the treble level for single card. Command Format: [SELTCnUi] [–] [–] [–] [–] or [+] [+] [+] [+]

12

n = Card ID number (n = slot # from 1 to 19) i = Unit ID number (i = 0 to 9)

+= increases volume. (maximum of 15 levels for treble).

– = decreases volume. (maximum of 15 levels for treble).

Example:

If the status of audio card 5 of unit zero is as follows:

VOLIN1:2

VOLIN2:12

VOLIN3:18

VOLOUT:8

BASS:8

TREBLE:14

LOUDNESS:ON

Send commands [SELTC5] [-] [-] [-] [-]. After executing that command, send [C5] to get the new status of card 5: [On123C5] VOLIN1:2

VOLIN2:12

VOLIN3:18

VOLOUT:8

BASS:8

TREBLE:10

LOUDNESS:ON

[SELTGkUi]

This command sets path to adjust the bass level for a group of cards. Command Format: [SELTGkUi] [–] [–] [–] [–] or [+] [+] [+] [+]

k = group number (k = # from 1-9) i = Unit ID number (i = 0 to 9)

+= increases volume. (maximum of 15 levels for treble).

– = decreases volume. (maximum of 15 levels for treble).

Example:

If card 1, 2, and 3 are grouped as group 5 of unit 1, send the [SELTG5U1] [–] [–] [–] command to decrease the treble volume for card 1, 2, and 3 simultaneously.

11. [VTLyCnUi]

This command sets absolute treble level for single card. Command Format: [VTLyCnUi] y = Absolute treble level (y = 1 to 15)

12