i n s t a l l a t i o n
m obile equipment restraint
Any appliance that is not furnished with a power supply cord but includes a set of casters, stand with casters, or a stacked configuration must be installed with a tether. Adequate means must be provided to limit the movement of this appliance without depending on or transmitting stress to the electrical conduit. The following requirements apply:
1.Casters must be a maximum height of 6" (152mm).
2.Two of the casters must be the locking type.
3.Such appliances must be installed with the use of a flexible connector secured to the building structure.
4.Each of the stacked appliances must be installed with the use of a flexible connector secured to the building structure. A single wall anchor may be used.
A mounting connector for a restraining device is located on the top right back panel of the appliance chassis or on an oven stand, approximately
18" (457mm) from the floor. A flexible connector is not supplied by nor is it available from the factory.
warning
risk of electric shock.
Appliance must be secured
to building structure.
Mounting connector for restraining device
CT Express series • INSTALLATION MANUAL •
