INSTALLATION

STEP 3: PREPARE THE VENTING BLOWER

4.Reassemble the blower wire. See Figure 15.

5.Rotate the unit so that the exhaust ports face the rear of the cabinet. See Figure 16. When you insert blower unit, blower wire must be like figure 16.

6.Place blower unit back into cabinet. Check that the exhaust ports face towards the rear of the cabinet. See Figure 17.

7.Reattach the blower plate to cabinet so the exhaust ports and blower plate opening are aligned. Attach with one blower unit mounting screw and then one blower plate mounting screw. See Figure 18.

1 unit

exhaust ports

Figure 15

Figure 16

 

 

plate

 

 

mounting

screws

exhaust

blower

unit

 

ports

exhaust

ports

 

 

"'_ blower unit

 

 

Figure 17

 

mounting

screws

 

Figure 18

 

ROOM-VENTED (Recirculating) INSTALLATION:

1.Remove one blower unit mounting screw and one blower plate screw. Remove the blower plate from cabinet.

See Figure 19.

2. Carefully lift the blower unit out of the microwave oven.

___

bml°uWetrinla_erews

3.Rotate blower unit 90° so the exhaust ports face the front of the cabinet. See Figure 20.

blower unit

4.Place blower unit back into microwave oven.

5.Reattach blower plate to microwave oven. Attach with the one blower unit mounting screw and then the one blower plate mounting screw.

See Figure 21.

\

mountingscrews

Figure 19

_

blower plate

 

mounting screws

unit

"'_ blower unit mounting screws

Figure 20

Figure 21

-15-

Page 15
Image 15
Amana ACO1860A owner manual ROOM-VENTED Recirculating Installation