Using the Oven Control

Flashing Display

When power is connected

or interrupted, oven display flashes. Press CLOCK to reset display. Clock may need to be reset.

Setting Electronic Clock

12 hour clock does not display AM, PM or military time. When power is connected or restored, display flashes until CLOCK or CANCEL pad is pressed.

1. Press CLOCK pad.

• TIME displays.

2.Press MORE or LESS pads until correct time of day displays.

3.Press OVEN CANCEL pad to set time, or time is set after 30 seconds of no adjustment.

Timer Signal

When time elapses, timer will sound three one-second beeps and then once every 30 seconds. END also displays. Press TIMER ON/OFF pad to stop timer and return to clock display.

Setting Minute Timer

Timer is a timer only. Electronic timer does not control bake, broil or self-clean function. Timer can be set from 5 seconds up to

9 hours and 50 minutes.

1.Press TIMER ON/OFF pad.

• TIMER displays.

2.Press MORE or LESS pads until desired time

displays.

• Timer begins counting down automatically after time is entered.

3.Press and hold TIMER ON/OFF pad for 3 seconds to cancel timer signal.

•After time elapses, timer beeps three tones, and then once approximately every 6 - 8 seconds until CANCEL is pressed.

Resetting and Canceling Timer

To cancel timer when remaining time is displayed or when signal is beeping, press and hold TIMER ON/OFF pad for approximately

3 seconds DO NOT press OVEN CANCEL pad. CANCEL will stop all cooking functions if the oven is in use.

12