Amana AKES3060, AKED3060 owner manual Operation, Installing Griddle, Coil Modules

Operation

•To remove grille module turn all controls to OFF, allow to cool, and reverse steps above.

Coil Modules

Installing Griddle

1.Turn all controls to OFF.

2.Install module pan, grease shield and griddle element according to “Installing Smoke Control Grill™ Module” section.

3.With grease trap toward rear of cooktop, place griddle pan over of element.

•To remove griddle module turn all controls to OFF and reverse steps above.

Grease

trap

!WARNING

To avoid risk of serious personal injury, property damage, or fire, do not leave surface elements unattended while in operation. Grease and spillovers can ignite causing a fire.

1.Push in and turn surface element control to desired setting.

•Cooktop has 1 indicator light for all control knobs. When an element is on, indicator light glows red.

•Surface element control does not stop at each setting. See settings below.

LO—Use to prepare food at less than boiling temperatures or to simmer.

2 through 6—Use to maintain boiling of larger amounts of food, low temperature frying and to maintain correct pressure in a pressure cooker.

HI—Use to bring food to boiling temperatures. When food is boiling, temperature setting should be reduced.

2. When finished cooking, turn control to OFF.

	5	4
		3
6		2
	HI	SIM

OFF

Surface element control knob

12