Care and Cleaning
Removing Oven Door | Replacing Oven Light |
CAUTION
To avoid personal injury or property damage, handle oven door with care.
•Door is heavy and can be damaged if dropped.
•Avoid placing hands in hinge area when door is removed. Hinge can snap closed and pinch hands.
•Do not scratch or chip glass, or twist door. Glass may break suddenly.
•Replace door glass if damaged.
•Do not lift door by handle.
1.Open door fully.
2.Remove screws.
•Oven doors are attached with a screw on each side of lower oven door.
3.Close door to first stop, grasp door firmly on each side, and lift upward until door is off hinges.
(Figure 22)
•Do not lift door by handle. Glass can break.
•Only push hinges closed once oven door is removed if necessary. Use both hands when closing hinge. Hinge snaps closed.
WARNING
To avoid risk of burns or electrical shock, disconnect electrical supply to oven before changing light bulb.
•Before replacing light bulb make sure bulb is cool.
•Do not operate oven without bulb and cover in place.
CAUTION
Wear gloves to protect hands from accidental bulb breakage.
1.Disconnect electrical supply.
2.Remove oven door if desired.
3.Unscrew light bulb cover located in rear of oven cavity. Then turn light bulb counterclockwise to remove. (Figure 23)
4.Replace light bulb with
•Do not overtighten bulb or it may be difficult to remove later.
5.Replace light bulb cover and oven door before use.
6.Reconnect power supply.
Figure 23
Figure 22
Figure 19
20
