Amana ARR6420 How Long Should the Self, Self-cleaning, Delayed Self-cleanCycle, Clean Cycle Last?

Using the Oven Control (cont'd)

!CAUTION

To avoid fire or smoke damage, remove any flammable materials from storage drawer. Items like plastic containers and paper manuals can melt or burn.

!WARNING

To avoid risk of personal injury, do not touch oven vents or area around vents during self- cleaning. These areas can become hot enough to cause burns.

!CAUTION

To avoid risk of fire or smoke damage, clean excess spills before starting Self Clean.

How Long Should the Self-

Self-cleaning

Self-clean feature uses high oven temperature to clean oven interior.

1.Prepare oven for self-cleaning (see below right).

2.Press CLEAN pad.

• CLEAN,	TIME and — — — —	display.
3. Press or	pad to adjust cleaning time.		CLEAN

•3:00 displays when arrows are first pressed.

•Oven begins to clean. CLEAN, TIME, and

ON display during cycle. LOCK flashes in

display when automatic door latch is locking.

•LOCK is displayed during Self Clean cycle while door is locked.

•When oven has cooled to a safe temperature, the LOCK light

flashes while the door latch opens. When oven has cooled enough to open, the LOCK light no longer displays and door can be opened. No signal sounds at end of self clean cycle.

Delayed Self-clean Cycle

Set oven to begin and end cleaning at later time Oven control calculates starting time.

1.Prepare oven for self-cleaning (see right).

2.Press CLEAN pad.

• CLEAN,	TIME and — — — —	display.
3. Press or	pad until desired amount of		CLEAN
cleaning time is displayed.

4.Press STOP TIME pad.

5.Press or pad until desired stopping time appears in display.

•Starting time is automatically calculated based on amount of cleaning time and stop time.

CLEAN, TIME, and ON display during cycle.	STOP
• LOCK flashes in display when automatic door	TIME
latch is locking.

•The oven begins the Self-Clean cycle.

•LOCK is displayed during Self Clean cycle.

•When oven has cooled to a safe temperature, the LOCK light

flashes while the door latch opens. When oven has cooled enough to open, the LOCK light no longer displays and door can be opened. No signal sounds at end of self clean cycle.

Clean Cycle Last?

The Self-Clean cycle can be set from 2 to 4 hours. Minimum recommended cleaning time is 3 hours. After the Self- Clean cycle ends, the oven must cool before the oven door can be opened. When the LOCKED light no longer glows in the display, you can safely open the oven door. DO NOT force the oven door open while the LOCKED light shows in the display. The oven door lock can be damaged.

Do I need to prepare?

To get the best results from the self- clean cycle, follow these steps:

•Remove birds or animals susceptible to smoke or other fumes from the room or adjoining room.

•Make sure oven light cover is properly in place. Do not use cleaning cycle if it is not.

•Remove oven racks and all cooking utensils from oven.

•Clean excess spills from oven interior.

•Remove items from range top and backguard. These areas can become hot during self-cleaning cycle.

Interrupt Self-

Clean Cycle

1.Press OVEN CANCEL pad.

2.When oven has cooled to a safe temperature, door will unlock and can be opened. DO NOT force door. This can cause damage to the latch.

13