Amana Bottom-Freezer Refrigerator Freezer Features, Primary Features, Shelves, Drawers

Freezer Features

Primary Features

Automatic Ice Maker (some models)

Using Ice Maker for the First Time

•Confirm ice bin is in place

and ice maker arm is down.

• After freezer section reaches

between 0° to 2°F (-18° to -17° C), ice maker fills with water and begins operating.

•Allow approximately 24 hours after installation to receive first harvest of ice.

•Discard ice created within first 12 hours of operation to verify system is flushed of impurities.

Operating Instructions

•Confirm ice bin is in place and ice maker arm is down.

•After freezer section reaches 0° to 2°F (-18° to -17° C), ice maker fills with water and begins operating. You will have a complete harvest of ice approximately every 3 hours.

• Stop ice production by raising ice maker arm until click is heard.

•Ice maker will remain in the off position until arm is pushed down.

Shelves

Ice Service Rack

To install and remove rack:

• To install, slide L-shaped
groove of shelf down over	1
back wall screw. Push rack back
until screw is stopped in L-shaped		2
groove (1) . Slide front portion of
shelf over front wall screw (2).

•To remove, perform above steps in reverse order.

Fixed Freezer Shelf

To remove and install shelves:

•Remove shelf by pulling

out to full extension. Tilt up front of shelf and pull straight out.

• To install, insert shelf into refrigerator liner rails and push to back of compartment.

Slide-Out Freezer Shelf

To remove and install shelves:

• Remove shelf by pulling out to full extension. Tilt up front of shelf and pull straight out.

• To install, insert shelf into refrigerator liner rails and push to back of compartment.

!CAUTION

To avoid property damage, observe the following:

•Do not force ice maker arm down or up.

•Do not place or store anything in ice storage bin.

Drawers

Wire Basket

To remove and install basket:

•To remove basket, pull basket

out to full extension. Tilt up front of basket and pull straight out.

•To install, insert basket into refrigerator liner rails and push back into place

Pullout Drawer Baskets (some models)

(Door assembly of drawer removed from illustration for visual clarity)

To remove and replace top basket:

• Remove basket by pulling basket out to its full extension and lift out.

• Replace basket by sliding into upper molded railing.

To remove and replace bottom basket:

•Remove basket by lifting basket from rail guides.

•Replace basket by placing into rail guides.

Door Storage

Fixed Door Shelf

The fixed door shelf provides convenient storage for frozen food items in freezer door.

To remove and install door shelf:

• To remove shelf, lift assembly from side liner tabs and pull out.

• To install, fit ends of shelf assembly on liner tabs and slide down.

Tilt-Out Bin (some models)

The tilt-out bin (A) provides A convenient storage for frozen food items in freezer door and tilts forward for easy access of those items.

To remove and install door shelf:•See above instructions listed for

Fixed Door Shelf.

A - 13