Installing Your Refrigerator
How to Remove and Install the Pullout Drawer
!WARNING
To avoid electrical shock which can cause severe personal injury or death, disconnect power to refrigerator before removing doors. After replacing doors, connect power.
!CAUTION
To avoid possible injury, product, or property damage, you will need two people to perform the following instructions.
Removing Pullout Drawer
1 Pull drawer open to full extension. Remove Phillips screw from each side of rail system.
Installing Pullout Drawer
1 Pull both rails out to full extension.
2 Remove lower basket by lifting basket from rail system.
3 Pull upper basket out to full extension, and lift out to remove.
4 Lift top of door to unhook door supports from rail system. Lift door out to remove.
2 Hook door supports into rail tabs, as illustrated, and lower door into final position.
3 With drawer pulled out to
full extension, insert lower 
basket by aligning tabs 
on both side of lower 
basket with notches in 
rail assembly.
4 Slide upper basket into unit. Make sure that rear of basket hooks behind rail catch.
A - 8
