Problem
Ice maker (some models) is not producing ice.
Ice cubes have an odor.
Ice cubes stick together or ‘shrink’.
Ice forms in inlet tube to ice maker (some models).
Solution
•Confirm ice maker arm is down.
•Confirm household water supply is reaching water valve.
•Confirm ice maker wiring harness is completely inserted into proper holes.
•Check for kinks in copper or plastic tubing. Remove kinks or replace tubing.
•Check electrical connections to water valve coil and connector block on refrigerator cabinet.
•Confirm Deepfreeze® section is operating at proper temperature.
•See Odor Removal instructions in Care and Cleaning section.
•Discard ice and clean ice bucket or trays more frequently. Ice cubes are porous and absorb odors easily.
•Empty ice cube bucket or trays more frequently. If used infrequently, ice cubes may stick together or shrink.
•Check water pressure. Low water pressure will cause valve to leak. Self- piercing valves cause low water pressure. Amana recommends using a saddle valve. Contact
18
