!CAUTION
To avoid property damage, protect soft vinyl or other flooring with cardboard, rugs, or other protective
material when moving refrigerator.
Leveling Refrigerator
Some installation may require door reversal to achieve full door swing. If so proceed to Door Reversal section before leveling your refrigerator.
If your refrigerator requires ice maker water supply connection, proceed to Connect Ice Maker Water Supply section before leveling refrigerator.
1.Plug in power cord.
2.Move refrigerator into final location.
3.Level refrigerator using a level placed on top of the refrigerator.
•Remove toe grille by grasping both ends and pulling straight out from unit. Grille snaps free.
•The left and right corners of front cabinet base each contain 2 screws to allow individual adjustment of all four corners. Adjust the front and rear of each corner until leveling is complete.
•Turn roller adjustment screws to the right to raise cabinet, or to the left to lower cabinet. Front of refrigerator must be ¼" (6 mm), or ½ bubble on your level, higher than the back of your refrigerator.
•After leveling, turn stabilizing leg (some models) clockwise until firmly against floor.
A
B
|
| C |
A | Rear roller adjustment | C Stabilizing leg* |
B | Front roller adjustment | *some models |
•Locate metal clips mounted to inside of toe grille assembly. Hook bottom set of clips inside metal molding beneath freezer. Press forward on upper part of grille until top portion snaps into place.
A
A Metal clips
9
