Controls
•Remove toe grille to gain access to roller adjustment screws.
!CAUTION
To avoid property damage and damage to the unit, do not use power tools to adjust leveling. Use hand tools only.
•Turn rear roller adjustment screw clockwise to raise corner that is rocking.
B
A
C
A. | Rear roller adjustment screw | C. Front roller adjustment screw |
B. | Door hinge screws |
|
This refrigerator is designed to operate at normal household temperatures of 55° to 110°F (13° to 43°C).
Refrigerator and Freezer Controls
Refrigerator and freezer controls are located on upper rear wall of refrigerator section.
A
B
A.Freezer control
B.Refrigerator control
•Check alignment of top of doors. If doors are level replace toe grille.
If tops of doors are not level perform the following steps:
•Remove toe grille.
•Determine which door needs to be lowered.
•To lower corner of door, turn front roller adjustment screw counterclockwise.
•Roller adjustment screw should be turned until doors are level.
A
A.Turn roller adjustment screw to lower door.
•If the unit has reached the bottom of its adjustment range, and the doors are still not
B
B.Turn roller adjustment screw to raise door.
7.Review “Installation Checklist” in Owner’s Manual with consumer.
When freezer control is set to off, neither refrigerator nor freezer sections will cool.
Setting Controls
With setting 1 being the warmest and setting 7 being the coldest, start by setting both controls to 4.
Adjust controls by using a household thermometer that includes temperatures between
Place thermometer snugly between frozen packages in freezer section. Wait 5 to 8 hours. If freezer temperature is not 0° to 2°F
Place thermometer in a glass of water in middle of refrigerator section. Wait 5 to 8 hours. If refrigerator temperature is not 38° to 40°F (3° to 4°C), adjust refrigerator control by one number at a time. Check temperature again after 5 to 8 hours.
5
