Amana RFS9 Power-up Display, Interrupting Operation, Canceling Mistakes, Manual Time Entry, Pads

Models: RFS11 RFS9

1 16
Download 16 pages 53.7 Kb
Page 8
Image 8
Power-up Display

Power-up Display

After equipment is plugged in, display shows 4 large dashes and 1 small dash. Open and close oven door to clear display and activate pads.

Interrupting Operation

Open oven door or press RESET pad to interrupt operation. Oven fan continues to operate. Display continues to show countdown time. Close door and press START pad to resume oven operation.

Canceling Mistakes

If oven is not operating, press RESET pad to clear display.

If oven is operating, press RESET pad once to stop oven, then again to clear display.

If oven door is open and time shows in display, close oven door and press RESET pad to clear display.

Preprogrammed Times and Cook Level

All preprogrammed pads arrive set at full power.

Pads

Heating Times

1

10 seconds

2

20 seconds

3

30 seconds

4

45 seconds

5

1 minute

6

1 minute 30 seconds

7

2 minutes

8

3 minutes

9

4 minutes

0

5 minutes

Operating Preprogrammed Pads

Equipment has 10 preprogrammed number pads. Instructions are written for factory programmed ovens. Ovens that are reprogrammed can respond differently than described below.

1.Open oven door, place food in oven, and close oven door.

Fan and light operate.

If pad is not pressed in 30 seconds, open and close oven door again.

2.Press desired number pad.

Oven operates and time counts down.

Display shows heating time, “POWER”.

If additional heating time is required, press preprogrammed pads before or after heating cycle ends.

3.Oven stops heating and oven signal sounds when heating timing elapses.

Manual Time Entry

1.Open oven door, place food in oven, and close oven door.

Fan and light operate.

If pad is not pressed in 30 seconds, open and close oven door again.

2.Press TIME ENTRY pad.

Display shows “00:00” and “READY”.

3.Press number pads to enter desired cooking time.

For example, to heat for 2 minutes 30 seconds, press 2, 3, and 0 pads.

4.Press START pad.

Oven operates and time counts down.

Display shows heating time, “POWER”.

5.Oven stops heating and oven signal sounds when heating timing elapses.

8

Page 8
Image 8
Amana RFS9, RFS11 Power-up Display, Interrupting Operation, Canceling Mistakes, Preprogrammed Times and Cook Level, Pads