REAR PANEL CONNECTIONS
1.Local Source Inputs 1~4
Each of these stereo RCA inputs receives an audio signal from up to four independent audio sources.
Remarks: There are other 4 Remote sources from Zone 1~4 as Remote Source Inputs R5 to R8 can be selected by all zones.
Remote Source R5 is located at XS1 of Zone 1, Remote Source R6 is located at XS1 of Zone 2, Remote Source R7 is located at XS1 of Zone 3 and Remote Source R8 is located at XS1 of Zone 4. Signals of R5 are mixed with signals of Local Source 1, Signals of R6 are mixed with signals of Local Source 2, Signals of R7 are mixed with signals of Local Source 3 and Signals of R8 are mixed with signals of Local Source 4. Users can connect Source unit to one of the two mixed source inputs or connect two Source units to both Local and Remote Source Inputs. When users connect two Source units to both Local and Remote Source Inputs, u s e r s c a n p l a y e a c h s o u r c e separately or play both sources at the same time with signals of the two sources mixed together.
2.IR Out - 38KHz
For most Audio Sources
3.IR Out - 56KHz
For cable and satellite boxes
4.Mute
T h i s 3 . 5 m m n o n - s h o r t i n g S t e r e o connector (Power, Mute, Gnd) is designed to be used in conjunction with the AMC PDM1
5.Link
This 3.5mm mono connection is used to expand the AMC XOi from four to eight zones. - This is an option feature.
6.Status
This 3.5mm mono connection provides a +12VDC output when a zone is turned on. This can be used to trigger external equipments.
7.12VDC
For supplying 12VDC to external modules. (total 1A max)
8.Keypads & Remote Sources
9.Speaker Terminals
10.RS232
This is used for making interface with other system and for factory purposes.
-This is an option feature.
11.AC input receptacle with Fuse
FRONT PANEL CONTROLS
1. Power Switch (Standby / Off) & Blue LED
The Power Switch turns AMC XOi "Standby" or "Off"
The Blue LED will be lit up during "Standby", will be turned off during "Off"
2. Zone LED & 4 square Recesses
Each of these LEDs indicates, when lit, that its zone keypads are turned on. The 4 square recesses are for putting labels of names of all zones
4
