6.Keypad XK1 and Zone Setup
The Zone number each keypad XK1 belonging to is decided by which RJ45 connector each keypad connected through
EQ Control and Source Grouping
The keypads can be used to set specific zone functions. These are for bass and treble EQ response and source grouping. To change bass response, press the Mute button and Source 2 button simultaneously. Adjust the bass level up or down by using the Volume Up and Volume Down buttons. The Volume indicator LEDs will indicate the output level, Fig. 7. Adjust treble response using the same process. This is accessed by pressing the Mute and Source 3 buttons. Once the desired setting is made, press the Source button again to return the keypad to normal operation.
Mute
Power
Volume
Source grouping is a feature that allows multiple zones in an open living space to always share the same source selection but still retain individual volume and on/off control. This is achieved by pressing the Mute and Source 4. Volume Up enables the group function, and Volume Down disable the group function and cause the keypad to operate independently of all other groups, Fig 8.
Volume Reset
The XOi system keypads automatically reset the listening volume to a low level when all zones have been turned off and a zone is turned on again.
All off
All the zones in the system can be turned off simultaneously from any keypad by pushing and holding the power button until the keypad goes completely dark. A single push and release the power button will only turn that zone off. If another zone is on, the power button will remain lit.
Group Disabled | Group Enabled |
Mute
Power
Fig 8
Volume
11
