Replacing the Battery

Figure 16 shows how removing the connector looks if you remove the BBU control module from the controller.

Figure 16. Removing the power cable from the BBU module

Press down on the lever-like clip and pull the connector out.

3Remove the remote battery board from your system.

a Press down on the top of the battery module to free the clip on the bottom of the module.

b While pressing down on the top of the battery module, lift out the bottom of the battery module slightly.

www.3ware.com

24

Page 28
Image 28
AMCC 9690SA manual Removing the power cable from the BBU module