See page 3, fig. 3
Your Amcor dehumidifier controls the Relative Humidity by passing the air through the unit forcing the excess moisture to condensate over the cooling elements.
This condensate water then flows safely
GB
How it works
into a fixed drain.
The dried air then passes through a final heat exchanger where it is slightly warmed and
The level of demoistering is set with the humidistat control.
Positioning the dehumidifier
There must be free space of at least 30 cm between any other object and the front and the top of the unit.
Your Amcor dehumidifier can be installed in any area with a too high relative humidity, such as cellar, playing area, shed, archive or swimming pool.
The dehumidifier will begin to protect from the harmful effects of excess moisture as soon as it is plugged in and switched on.
When positioning your Amcor dehumidifier, ensure that it is placed on a level surface.
Best results are obtained when windows and doors are closed, thus preventing the possible influx of fresh, too humid, air.
When the unit is placed in a (swimming) pool, connect to the mains via a transformer or a breaking switch, conform the local regulations regarding electrical installations.
When the dehumidifier is in operation, open outside doors and windows only when necessary.
See page 3, fig. 5
The unit can stand on the floor or hung on a wall. All necessary items for wall mounting are supplied in the plastic bag.
Fix the supporting bracket with at least 5 screws horizontally to the wall, use the plugs for better fastening.
Wall mounting
Hang the unit on the bracket, the two tongues fit into the slots on the unit’s rear panel.
Make sure the two rubber pads (3) on the tongues and the two rubber supports
(4)on the lower part of the rear panel are properly placed.
5
