30925 Rev. 3.04 February 2004 | Builder’s Guide for AMD Opteron™ Processor- |
| Based Servers and Workstations |
a.Turn off the system and unplug it before installing each card.
b.Install additional cards one at a time.
c.Restart the system after every card installation.
Note: If you have difficulties with the installation of any of the cards or drivers, refer to Complex Configurations and IRQ Info, available on the AMD website.
23.As you install each card, verify the card is properly seated (connector fully inserted into the slot, front and back) and that the retention screws are in place.
24.Test the complete system for proper operation. If system functions properly, load any other software.
Appendix A | AMD Opteron™ | 49 |
|
|
