Raid Introduction
Deleting An Array
The Delete Array <4> Menu option allows for deletion of disk array assignments. This is not the same as deleting data from the drives themselves. If you delete an array by accident (and before it has been used again), the array can normally be recovered by defining the array identically as the deleted array.
WARNING: Deleting an existing disk array could result in its data loss. Make sure to record all array information including the array type, the disk members, and stripe block size in case you wish to undo a deletion.
FastBuild (tm) Utility 1.xx (c)
[ Delete Array Menu ]
Array No | RAID Mode | Total Drv | Capacity(MB) | Status |
Array 1 | Mirror | 2 | 8063 | Functional |
Array 2 | Stripe | 1 | 8063 | Functional |
Array 3 | Stripe | 1 | 8063 | Functional |
Array 4 | ||||
| [ Keys Available ] |
|
| |
| [↑ ] Up [↓ ] Down | [ESC] Exit | [Del] Delete |
|
1.To delete an array, highlight the Array you wish to delete and press the [Del] key.
2.The View Array Definition menu will appear (see below) showing which drives are assigned to this array.
FastBuild (tm) Utility 1.xx (c)
[ Define Array Menu ]
Array No | RAID Mode | Total Drv | Capacity(MB) | Status |
Array 1 | Mirror | 2 | 8063 | Functional |
Stripe Block: | 64 KB | [ Drive Assignments ] |
| |
|
|
| ||
Channel:ID | Drive Model |
| Capacity (MB) | Assignment |
1 : MasterQUANTUMCR8.4A | 8063 | Y |
| |
2 : MasterQUANTUMCR8.4A | 8063 | Y |
| |
64
