©American Audio® - www.AmericanAudio.us - Flex 100MP3 Instruction Manual Page 15
GENERAL FUNCTIONS AND CONTROLS (Cont.)
46. REmAIN INDICATOR - When "REMAIN" is indicated in the lcd diSplay (28) the time diSplay
(44) in the lcd will define the current track's remaining time. When "REMAIN" is not indicated in
the lcd diSplay (28) the time diSplay (44) in the lcd will define the track's elapsed time. When
"TOTAL REMAIN" is indictated the time display will show total time remaining of the entire CD. Mp3
discs will not have total remain time.
47. TRACK/FOLDER DISPLAY - This indicator describes which track or folder is currently cued or is
playing.
48.FOLDER/TRACK INDICATOR - This indicator shows you if you are looking at the track number
or the folder number..
49. CD INDICATOR - This will indicate that an audio disc is loaded into the player.
50. PITCH mETER - This meter will display the pitch percentage applied by the pitch Slider (7).
51. TEmPO LOCK - This will indicate the Tempo Lock function is active.
52. SINGLE INDICATOR - This indicates that the CD drive is in single play mode, the track will play
once and return to CUE mode. If the single indicator is not on the unit is in continuous mode. In con-
tinuous mode the drive will play all the remaining tracks on the disc.
53. AUTO BPm - This will indicate that the AUTO BPM counter is active.
54. AUTO CUE - This will indicate if the Auto Cue is on or off. Press and hold the Sgl/ctn (12) for 1
sec. to turn the Auto Cue function on and off. The unit's Auto Cue function will automatically set the
cue point at the beginninh of each track.
55. LOOP - Indicates that a LOOP is ready to be played again.
FOL DER T RA CK
M
TOTA LR EM AI N
SF
PI TC H
AUT O BP M
CD M P3
CUE
RE LO O P
SI NG LE
AU TO CU E