Manuals / Brands / Home Audio / Stereo Amplifier / American Audio / Home Audio / Stereo Amplifier

American Audio DCD-PRO1000 5. STOPPING PLAYBACK - Figures 10 & 11, 3. STARTING PLAYBACK - Figure 10, 4. AUTO CUE, 6. PAUSING - Figure 10

1 36

Download 36 pages, 7.13 Mb

5. STOPPING PLAYBACK - Figures 10 & 11

Stopping playback will not stop the drive mechanism, but merely

pause or cue the track, this function allows the unit to begin play

instantly. The drive mechanism will only stop if a disc is ejected or

the unit has gone in to sleep mode. There are two ways to stop

(pause) playback:

1) Press the PLAY/PAUSE BUTTON (32) during playback. This

will pause playback at the exact same point the PLAY/PAUSE

BUTTON (32) was pressed.

2) Press the CUE BUTTON (33) during playback. This will pause

playback and return the track to the last set cue point.

3. STARTING PLAYBACK - Figure 10

Insert an audio CD as described on page 16 (LOADING/EJECTING

DISCS). Pressing the PLAY/PAUSE BUTTON (32) with an audio

CD loaded will immediately start playback. The PLAY (52) indica-

tor will glow as soon as playback begins. The point at which play-

back starts (cue point) will automatically be stored in the memory

as the cue point. The unit will return to this cue point (the point at

which playback started) when the CUE BUTTON (33) is pressed

and released.

BASIC OPERATIONS (CONT.)

Figure 10

Figure 11

©American Audio® - www.americanaudio.us - DCD-PRO1000™ Instruction Manual Page 17

4. AUTO CUE

This function will automatically set a cue point to the first audio source when a CD is loaded. The first set

cue point will always be the beginning of track 1. If a new track is selected before the PLAY BUTTON (32) is

pressed, a new CUE POINT will be set to reflect the new starting point.

6. PAUSING - Figure 10

This function pauses playback at the exact same point the PLAY/PAUSE BUTTON (32) was pressed. Pressing

the PLAY/PAUSE BUTTON (32) will switch between play and pause modes. When the unit is in pause mode the

PAUSE INDICATOR (59) in the LCD DISPLAY (34) and the green PLAY/PAUSE BUTTON (32) L.E.D. will begin

to flash repeatedly.

Contents

Main DCD-PRO1000 CONTENTS NOTE: IMPORTANT INFORMATION IMPORTANT SAFETY ITEMS FOR U.S.A. & CANADA MODEL ONLY ELECTRICAL PRECAUTIONS ELECTRICAL SAFETY PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS American Audio - www.americanaudio.us - DCD-PRO1000 Instruction Manual Page 4 SAFETY INSTRUCTIONS Line Voltage Selection INTRODUCTION UNPACKING SET-UP PRECAUTIONS MAIN FEATURES SET-UP GENERAL FUNCTIONS AND CONTROLS Figure 3 A. CONTROLLER UNIT (FIGURE 3) Page Page B. REMOTE CONTROL - REAR Figure 4 GENERAL FUNCTIONS AND CONTROLS (Cont.) B. TRANSPORT UNIT (FIGURE 4) Page GENERAL FUNCTIONS AND CONTROLS (Cont.) Figure 5 D. LCD DISPLAY PANEL (FIGURE 5) BASIC OPERATIONS 1. LOADING/EJECTING DISCS 2. SELECTING TRACKS 5. STOPPING PLAYBACK - Figures 10 & 11 3. STARTING PLAYBACK - Figure 10 4. AUTO CUE 6. PAUSING - Figure 10 7. FRAME SEARCH 9. SETTING and STORING a CUE POINT: Setting A Cue Point: 8. SCANNING (FAST FORWARD / FAST REVERSE) Storing A Cue Point: 10. CREATING AND PLAYING A SEAMLESS LOOP LCD LOOP INDICA TORS EXITING A LOOP REPLA Y LOOP 11. EDITING A LOOP: 1) 2) 12. Using the Built In Sampler: To create a sample: Page Page Page 17. RECALL FLASH MEMORY: 18. CLEAR ALL MEMORY: 16. SYSTEM MEMORY: 19. FIRMWARE VERSION DISPLAY: Using the Pitch slider (18): 1. PITCH SLIDER (18): Activating the Pitch slider (18): PITCH ADJUSTMENTS: Page 4. JOG WHEEL (20): return to 3. PITCH BEND BUTTONS (25 & 26): FX SELECT: The FX SELECT BUTTON (9) allows you to toggle FILTER/PHASE EFFECT: The Filter and Phase effects tweak SCRATCH/SKID EFFECT: The Scratch Effect simulates real FLANGER/ECHO/ROBOT EFFECT : ROBOT EFFECT : FLANGER EFFECT : ECHO EFFECT : TRANS/PAN EFFECT: The TRANS effect simulates a real-time HOLD BUTTON: PARAMETERS: FLIP-FLOP Note: Compatible Q-Deck Mixer FLIP-FLOP "Q"-START/FLIP-FLOP - FLASH START SET-UP W ARRAN TY INFO RMA TION : 1-YEAR LIMITED WARRANTY SPECIFICATIONS change without any prior written notice.