American Audio DCD-PRO1000 - page 25

BASIC OPERATIONS (CONT.)

©American Audio® - www.americanaudio.us - DCD-PRO1000™ Instruction Manual Page 25

TIME BAR INDICATOR - Details the time defined in the TIME METER (65, 66, & 67) as a visual bar icon. As

with the TIME METER (65, 66, & 67) this bar is also dependent on the selected time function TOTAL REMAIN

(58), OR REMAIN (58). This bar will begin to flash when a track is ending regardless of which time function

you are in. Use the flashing bar as a visual reminder that a track is ending.

15. CHANGING THE TIME DISPLAY (65, 66, & 67)\TIME

BAR (64):

DURING NORMAL PLAYBACK, pressing the TIME BUTTON

(21), will change the time display information (65, 66, 67, & 64) in

the LCD (16) see figure 34. The following is a break down of the

time settings and their definitions:

ELAPSED (64) - This describes the time in the LCD (65, 66,

& 67) as the current TRACKS Elapsed running time.

REMAIN (58) - This describes the time in the LCD (65, 66,

& 67) as the current TRACKS remaining running time.

1)

TOTAL REMAIN (58) - This describes the time in the LCD

(65, 66, & 67) as the disc total remaining running time.

3)

2)

Figure 34

Figure 33

IN CUE MODE: While in cue mode and when the

touch sensitivity function is active, tapping on the JOG

WHEEL (20) can be used to start playback. The unit

will continue to playback until the JOG WHEEL (20) is

released. One the JOG WHEEL (20) is released the unit

will return to the last cue point.

Contents

Main DCD-PRO1000 CONTENTS NOTE: IMPORTANT INFORMATION IMPORTANT SAFETY ITEMS FOR U.S.A. & CANADA MODEL ONLY ELECTRICAL PRECAUTIONS ELECTRICAL SAFETY PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS American Audio - www.americanaudio.us - DCD-PRO1000 Instruction Manual Page 4 SAFETY INSTRUCTIONS Line Voltage Selection INTRODUCTION UNPACKING SET-UP PRECAUTIONS MAIN FEATURES SET-UP GENERAL FUNCTIONS AND CONTROLS Figure 3 A. CONTROLLER UNIT (FIGURE 3) Page Page B. REMOTE CONTROL - REAR Figure 4 GENERAL FUNCTIONS AND CONTROLS (Cont.) B. TRANSPORT UNIT (FIGURE 4) Page GENERAL FUNCTIONS AND CONTROLS (Cont.) Figure 5 D. LCD DISPLAY PANEL (FIGURE 5) BASIC OPERATIONS 1. LOADING/EJECTING DISCS 2. SELECTING TRACKS 5. STOPPING PLAYBACK - Figures 10 & 11 3. STARTING PLAYBACK - Figure 10 4. AUTO CUE 6. PAUSING - Figure 10 7. FRAME SEARCH 9. SETTING and STORING a CUE POINT: Setting A Cue Point: 8. SCANNING (FAST FORWARD / FAST REVERSE) Storing A Cue Point: 10. CREATING AND PLAYING A SEAMLESS LOOP LCD LOOP INDICA TORS EXITING A LOOP REPLA Y LOOP 11. EDITING A LOOP: 1) 2) 12. Using the Built In Sampler: To create a sample: Page Page Page 17. RECALL FLASH MEMORY: 18. CLEAR ALL MEMORY: 16. SYSTEM MEMORY: 19. FIRMWARE VERSION DISPLAY: Using the Pitch slider (18): 1. PITCH SLIDER (18): Activating the Pitch slider (18): PITCH ADJUSTMENTS: Page 4. JOG WHEEL (20): return to 3. PITCH BEND BUTTONS (25 & 26): FX SELECT: The FX SELECT BUTTON (9) allows you to toggle FILTER/PHASE EFFECT: The Filter and Phase effects tweak SCRATCH/SKID EFFECT: The Scratch Effect simulates real FLANGER/ECHO/ROBOT EFFECT : ROBOT EFFECT : FLANGER EFFECT : ECHO EFFECT : TRANS/PAN EFFECT: The TRANS effect simulates a real-time HOLD BUTTON: PARAMETERS: FLIP-FLOP Note: Compatible Q-Deck Mixer FLIP-FLOP "Q"-START/FLIP-FLOP - FLASH START SET-UP W ARRAN TY INFO RMA TION : 1-YEAR LIMITED WARRANTY SPECIFICATIONS change without any prior written notice.