American Audio DCD-PRO1000 HOLD BUTTON:, PARAMETERS:

©American Audio® - www.americanaudio.us - DCD-PRO1000™ Instruction Manual Page 32

BUILT-IN EFFECTS

Figure 52

HOLD BUTTON: Use the HOLD BUTTON (6) to lock your

customized parameters. If the hold button is not activated any

changes to your parameters will be momentary. To activate the

hold function press the HOLD BUTTON (6) as in figure 52. When

the hold function becomes activated, the hold button will begin

to glow blue.

PARAMETERS:

All the effects have adjustable parameters. The parameters

change the way the effect will react. To enter the parameters

menus for any of the effects, press or turn either of the two

PARAMETER KNOBS (2 OR 3) as in figure 51. When the param-

eter mode is selected the time display in the LCD (34) will change

to indicate the parameter your are adjusting. All effects except the

pan effect have two adjustable parameters. PARAMETER TIME

(2) and PARAMETER RATIO (3). Use these knobs to customize

the effects to your liking.

Figure 51

Contents

Main DCD-PRO1000 CONTENTS NOTE: IMPORTANT INFORMATION IMPORTANT SAFETY ITEMS FOR U.S.A. & CANADA MODEL ONLY ELECTRICAL PRECAUTIONS ELECTRICAL SAFETY PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS American Audio - www.americanaudio.us - DCD-PRO1000 Instruction Manual Page 4 SAFETY INSTRUCTIONS Line Voltage Selection INTRODUCTION UNPACKING SET-UP PRECAUTIONS MAIN FEATURES SET-UP GENERAL FUNCTIONS AND CONTROLS Figure 3 A. CONTROLLER UNIT (FIGURE 3) Page Page B. REMOTE CONTROL - REAR Figure 4 GENERAL FUNCTIONS AND CONTROLS (Cont.) B. TRANSPORT UNIT (FIGURE 4) Page GENERAL FUNCTIONS AND CONTROLS (Cont.) Figure 5 D. LCD DISPLAY PANEL (FIGURE 5) BASIC OPERATIONS 1. LOADING/EJECTING DISCS 2. SELECTING TRACKS 5. STOPPING PLAYBACK - Figures 10 & 11 3. STARTING PLAYBACK - Figure 10 4. AUTO CUE 6. PAUSING - Figure 10 7. FRAME SEARCH 9. SETTING and STORING a CUE POINT: Setting A Cue Point: 8. SCANNING (FAST FORWARD / FAST REVERSE) Storing A Cue Point: 10. CREATING AND PLAYING A SEAMLESS LOOP LCD LOOP INDICA TORS EXITING A LOOP REPLA Y LOOP 11. EDITING A LOOP: 1) 2) 12. Using the Built In Sampler: To create a sample: Page Page Page 17. RECALL FLASH MEMORY: 18. CLEAR ALL MEMORY: 16. SYSTEM MEMORY: 19. FIRMWARE VERSION DISPLAY: Using the Pitch slider (18): 1. PITCH SLIDER (18): Activating the Pitch slider (18): PITCH ADJUSTMENTS: Page 4. JOG WHEEL (20): return to 3. PITCH BEND BUTTONS (25 & 26): FX SELECT: The FX SELECT BUTTON (9) allows you to toggle FILTER/PHASE EFFECT: The Filter and Phase effects tweak SCRATCH/SKID EFFECT: The Scratch Effect simulates real FLANGER/ECHO/ROBOT EFFECT : ROBOT EFFECT : FLANGER EFFECT : ECHO EFFECT : TRANS/PAN EFFECT: The TRANS effect simulates a real-time HOLD BUTTON: PARAMETERS: FLIP-FLOP Note: Compatible Q-Deck Mixer FLIP-FLOP "Q"-START/FLIP-FLOP - FLASH START SET-UP W ARRAN TY INFO RMA TION : 1-YEAR LIMITED WARRANTY SPECIFICATIONS change without any prior written notice.