8. FRAME SEARCH

This feature allows you to scroll through a track to set a cue, or
loop point. To use the scroll function you must first be in Pause
Mode or Cue Mode. Once you are in Pause or Cue mode, use
your finger tip to turn the
JOG WHEEL (13)
to scroll through
the track (figure 9). Turning the wheel in a clockwise direc-
counter-clockwise direction rewinds the frame search. When
you use the
JOG WHEEL (13)
the monitor (headphone level)
of a mixer allows you to here what you are scrolling through.
Once you reach your desired starting point you can set a cue
(starting) point by pressing the
PLAY/PAUSE BUTTON (18)
as
in figure 9. Pressing the
CUE BUTTON (16)
will return the disc
to the cue point just set.

9. SCANNING (FAST FORWARD / FAST

REVERSE)

This function gives you a fast search through a disk or
track. To do this turn
SHUTTLE WHEEL (12)
in clock-
wise direction for fast forward or counterclockwise for
fast reverse. You can scan in 4 different forward and 4
different reverse speeds depending on how much you
rotate the wheel.
Figure 9
Figure 10
BASIC OPERATION
©
American Audio
®
- www.americandj.com - SCD-100™ Instruction Manual Page 15
TRACK M S F
COMPACT
DIGITAL
AUDIO
1 BIT 8 TIMES OVERSAMPLING D/A CONVERTER COMPACT DISC PLAYER
ON
OFF
TRACK M S F
COMPACT
DIGITAL
AUDIO
1 BIT 8 TIMES OVERSAMPLING D/A CONVERTER COMPACT DISC PLAYER
ON
OFF

7. AUTO CUE

”Cueing” is the action of preparing for playback. When the unit is in cue mode the
CUE LED (15)
will flash
repeatedly. The unit is designed to automatically cue at the first audible signal on the first of a disc when a
disc is inserted. If a track is selected before a disc is inserted, the unit will automatically cue to the first audible
signal for the selected track.