American DJ Flight-Moon instruction manual Flight Moon Contents, Flight Moon General Instructions

Flight Moon™	Contents
Introduction	3
Customer Support	3
Product Registration	4
Features	3
DMX Traits	3
Set-Up	3
Lamp & Fuse Replacement	3
Specifications	3
Optional Foot Switch	3
Flight Moon™	General Instructions

To optimize the performance of this product, please read these operat- ing instructions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference.

Flight Moon™ Product Registration

The Flight Moon™ carries a one year (365 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Please contact American DJ® customer support for a R.A. number.

Flight Moon™ Features

•Micro-Stepping Motors for Smooth Color Transitions

•DMX-512 Protocol Compatible (Uses 2 DMX Channels)

•Full Manual Focusing

•Fan Cooled.

•7 Colors Plus White

•Master/Slave Operation

•Internal Microphone with Volume Sensitivity Knob

•Easy Lamp Replacement

•ZB-JCR H5 15v/150w Lamp

•Variable Speed Strobe Function

•Optional FlightMoon/C Remote Controller

Flight Moon™ Safety Precautions

•To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture

•Do not spill water or other liquids into or on to your unit.

•Be sure that the local power outlet match that of the required voltage for your unit.

•Do not attempt to operate this unit if the power cord has been frayed or broken.

•Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal short.

•Disconnect from main power before making any type of connection.

•Do not remove the cover under any conditions. There are no user serviceable parts inside.

•Never operate this unit when it’s cover is removed.

•Never plug this unit in to a dimmer pack

•Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall.

•Do not attempt to operate this unit, if it becomes damaged.

•This unit is intended for indoor use only, use of this product outdoors voids all warranties.

•During long periods of non-use, disconnect the unit’s main power.

•Always mount this unit in safe and stable matter.

•Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience recep- tacles, and the point where they exit from the appliance.

•Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 7 for cleaning details.

•Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (includ- ing amplifiers) that produce heat.

•The fixture should be serviced by qualified service personnel when:

A.The power-supply cord or the plug has been damaged.

B.Objects have fallen, or liquid has been spilled into the appliance.

C.The appliance has been exposed to rain or water.

D.The appliance does not appear to operate normally or exhibits a marked change in performance.

©American DJ® - www.americandj.com - Flight Moon™ Instruction Manual Page 3 ©American DJ® - www.americandj.com - Flight Moon™ Instruction Manual Page 4