also change chase patterns normally. To activate this function press and release the MANUAL STEP (26) while holding down the SHIFT BUTTON (16). The LCD DISPLAY (6) MANUAL STEP LED will light, indicating this function has been activated. To exit this function press the CHASE BUTTON (24) at any time.
Fade Time Function: This function can be operated in any normal chase function. This function allows you to control the amount of time it takes for one scene to switch off and the next to turn on. Basically one scene fades to the next. The amount of fade time varies from instant to 10 minutes. This function is controlled by the FADE TIME SLIDER (7) and only effects the dimmer channels
Midi Settings: This controller can be triggered by any type of MIDI device. To use the MIDI function, plug in a standard MIDI controller to the MIDI input jack (35) on the rear of the Light Station.™ When your unit is receiving a MIDI signal the yellow MIDI SIGNAL LED will begin to flash rapidly. To operate properly the MIDI input channel must match that of the controller MIDI receiving channel. The controller’s default MIDI input signal is one, you may find it necessary to change this setting if you are running several MIDI devices. To adjust the controllers input MIDI signal hold down the MIDI CHANNEL BUTTON (27) for two seconds while hold- ing down the SHIFT BUTTON (16). “CH:01” will appear in the LCD DIS- PLAY (6). Use the STEP UP and DOWN BUTTONS (20 & 21) to change the input if necessary. Below you will find the MIDI NOTE DATA:
Note Number | Velocity | Function |
Master Pattern Level | Turns Patterns | |
Channel Dimmer | Identical to the Flash Channels | |
99 |
| Full ON |
101 |
| Execute the patterns step by step |
102 |
| Engages and disengages STAND BY mode |
Caution: This operation may be harmful to the controllers internal Flash Memory, please use this operation infrequently.
Options:
An optional foot controller may be purchased separately. This controller will allow you to control some of the function by remote. With the foot con- troller you may control pattern step up, pattern up, stand by mode, full on. Please contact you American DJ dealer for pricing.
Please note when use a MIDI controller the LEVEL SLIDER (8) will not function.
Controller Reset and Memory Dump: This board may be reset to factory settings at any time. You may use this function to erase all your programs. This function may also be used to eliminate any system
FREEZE.
©American DJ Suply® | ©American DJ Suply® |
