American Dryer Corp AD-120ES II installation manual ADE-120 II 80 Kw Electric Reversing, 3ø

ADE-120 II (80 Kw Electric)

Reversing, 3ø

ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)

IMPORTANT: 208 VAC and 240 VAC ARE NOT THE SAME. When ordering, specify exact voltage.

NOTES: A. When fuses are used they must be dual element, time delay, current limiting, class RK1 or RK5 ONLY. Calculate/determine correct fuse value, by applying either local or National Electrical Codes to listed appliance amp draw data.

B.Circuit breakers are thermal-magnetic (industrial) type ONLY . For others, calculate/verify correct breaker size according to appliance amp draw rating and type of breaker used.

C.Circuit breakers for 3-phase (3ø) dryers must be 3-pole type.

OVEN SIZE	SERVICE		WIRE	APPROX.
		PHASE		AMP DRAW
(Kw)	VOLTAGE		SERVICE
				60 Hz	50 Hz
80	208	3ø	3	234	---
80	240	3ø	3	205	209
80	380-400	3ø	3	---	130
80	380-400	3ø	4	---	130
80	416	3ø	3	---	120
80	416	3ø	4	---	120
80	460/480	3ø	3	107	---
80	575/600	3ø	3	86	---

NOTE: ADC has discontinued making 80 Kw dryers. This information is for dryers in the field.

IMPORTANT: The dryer must be connected to the electric supply shown on the data label that is affixed to the left side panel/wall area behind the control door. In the case of 208 VAC or 240 VAC, the supply voltage must match the electric service specifications of the data label exactly.

WARNING: 208 VAC AND 240 VAC ARE NOT THE SAME. Any damage done to dryer components due to improper voltage connections will automatically VOID THE WARRANTY.

NOTE: ADC reserves the right to make changes in specifications at any time without notice or obligation.

25