American Dryer Corp AD-200 NOTE: Identify the wires removed for proper reinstallation.

36
3. Sprinkler System Component Replacement
a. Resistive Temperature Device (RTD) Replacement
1) Turn the water supply to the dryer off.
2) Discontinue electric service to the dryer.
3) Remove the 1/4" compression fitting.
4) Remove the two (2) screws from the junction box.
5) Remove the wires of the RTD from the terminal strip.
NOTE: Identify the wires removed for proper reinstallation.
6) Loosen the cord grip cap.
7) Remove Resistive Temperature Device (RTD).
8) To install new RTD, reverse above procedure (steps #7 through #1).