American Dryer Corp D-40 installation manual Multiple Dryer Common Venting

Models: D-40

1 62
Download 62 pages 19.19 Kb
Page 19
Image 19

MULTIPLE DRYER (COMMON) VENTING

If it is not feasible to provide separate exhaust ducts for each dryer, ducts for individual dryers may be channeled into a common main duct. Each dryer is provided with a back draft damper. The individual ducts should enter the bottom or side of the main duct at an angle not more than 45° in the direction of the airflow.

The main common duct may be any shape so long as the minimum cross-sectional area is provided. The main duct should be tapered with the diameter increasing before each individual 8-inch (20.32 cm) duct is added (refer to Illus. C for horizontal venting and Illus. D for vertical venting).

IMPORTANT: No more than four (4) dryers maximum should be connected to one (1) main common duct with a vertical run.

NOTE: Distance between dryer single ducts being connected to the main common duct must be a minimum of 34-1/4” (87 cm) dryer width.

Ductwork should be laid out in such a manner where allowances are made at rear area of the dryer for removal of rear service panels or guards.

The illustrations on page 16 show the minimum cross section area for multiple dryer venting. These figures must be increased in proportion if the main duct run from the last dryer to where it exhausts has numerous elbows or is unusually long.

IMPORTANT: For extended ductwork runs, the cross section area of the duct can only be increased to an extent. For extended ductwork runs, a professional heating, venting, and air conditioning (HVAC) firm should be consulted for proper venting information.

Refer to page 16 for Multiple Dryer Horizontal Venting and Vertical Venting examples/illustrations.

15

Page 19
Image 19
American Dryer Corp D-40 installation manual Multiple Dryer Common Venting

D-40 specifications

American Dryer Corp has long been recognized as a leader in the manufacturing of high-efficiency commercial dryers, and the D-40 model is a prime example of their commitment to delivering quality, performance, and technological advancements. The D-40 is designed to meet the rigorous demands of laundromats, hotels, and other commercial laundry facilities, offering a perfect balance of power and efficiency.

One of the main features of the D-40 is its robust construction. Built with high-quality materials, this dryer ensures durability and longevity even in high-volume operations. The D-40 is equipped with a large capacity tumbler that can accommodate significant loads, making it an ideal choice for businesses that require efficient drying solutions.

The dryer utilizes a state-of-the-art microprocessor control system, allowing users to program multiple drying cycles tailored to specific fabric types or customer preferences. This technology enables precise drying times and temperatures, which helps to prevent damage to garments while maximizing efficiency. The control panel is user-friendly, featuring clear displays and intuitive navigation, ensuring that operators can quickly set up and adjust cycles as needed.

In terms of energy efficiency, the D-40 is engineered with advanced drying technologies that reduce utility costs. Its high-performance gas burners and optimized airflow design allow for rapid heat distribution, which significantly shortens drying times. The dryer also features a reliable heat exchanger system that ensures consistent heat output while minimizing energy consumption.

Another noteworthy characteristic of the D-40 is its sound-dampening design. The dryer is equipped with noise-reduction technology, allowing it to operate quietly, which is particularly beneficial in environments where noise may disrupt customers or staff.

Safety features are also of paramount importance in the D-40’s design. It includes a protective door interlock system that ensures the dryer cannot operate when the door is open, reducing the risk of accidents. Moreover, the D-40 has been designed with easy access for maintenance, making it simpler for technicians to perform routine checks and repairs.

In conclusion, the American Dryer Corp D-40 stands out in the competitive landscape of commercial dryers by combining high-capacity performance with energy efficiency, advanced technology, and a commitment to safety and durability. Its innovative features make it an ideal choice for businesses looking to optimize their laundry operations.