American Dryer Corp MDG75MNV, MDG75PNH installation manual For 110V Applications

FOR 110V APPLICATIONS FOR 208-240V APPLICATIONS

A ground lug is provided in the rear electrical box to connect your service ground.

b.3-Phase (3ø) Wiring Connections/Hookup

The electrical connections on ALL 3-phase (3ø) dryers are made into the rear service box located at the upper left area of the dryer. The electrical connections are made at the power distribution block located in the service box. The ground connection is made to the copper lug, also provided in this box. To gain access, the service box cover must be removed.

The neutral will only be used on 4-wire service. This is typical for 380-416V, 50 Hz.

113394 - 8 Maytag Co. 21