Zebra Technologies R402 manual Media Specifications

Media Specifications

Width	1 to 4.25 inches / 25.4 to 108 millimeters)
	1 to 2.25 inches / 25.4 to 57 millimeters (tag stock)
Length	0.5 to 22 inches / 13 to 559 millimeters with standard memory
Gap	0.08 to 0.16 inch (2.0 to 4.0 millimeters)
	0.118 inch / 3.0 millimeters recommended
Thickness	0.003 to 0.007 inch / 0.08 to 0.18 millimeter
Roll Size	Maximum outer diameter: 5 inches (127 millimeters
	Inner Core diameters: 1 or 1.5 inches (25.4 or 38 millimeters)
	Optional media hangers available for larger inner core
	diameters
Requirements	✔ User Zebra-brand direct thermal or thermal transfer media
	that is outside wound. Media may be reflective (black mark)
	sensing or transmissive sensing, die-cut, notched, or
	continuous)
	✔ For die-cut labels, use only full auto dies.
	✔ Notched media must have a 0.5 inch (13 mm) wide by 0.094
	inch (2.5 mm) long cutout located in the center of the roll.
	✔ The reflective media black marks must be located in the
	center of the roll. Mark width 0.5 inch (13 mm) centered and
	perpendicular to the edge of the media; mark length 0.094
	inch (2.4 mm) parallel to the bottom edge of the media.
Transponder	✔ Phillips I•Code
Requirements	✔ Texas Instruments Tag-It™
	✔ Inside Technologies PicoTag®
	✔ ISO-15693

Always thoroughly test your desired media for your specific application before buying in large quantities.

Ribbon Specifications

Roll Size	Maximum outer diameter: 1.3 inches / 33 millimeters
Length	2,900 inches / 74 meter capacity; provides 1:1 media roll to
	ribbon ratios
Width	At least as wide as media
Setup	Ink-side out
Requirements	User Zebra-brand ribbon that is outside wound.