d.Verify that the motor(s), heat, and door indicator lights on the back side of the microprocessor controller (computer) board are lit. (Refer to the illustration below.)
1)“FAN” (Blower) output light emitting diode (L.E.D.) indicator
2)“FOR” (Forward) output L.E.D. indicator
3)“Rev” (Reverse) output L.E.D. indicator
4)“Air” (Air Jet) output L.E.D. indicator
5)“HT 1” (Heat) output L.E.D. indicator
6)“Fuse” (Main Fuse) input L.E.D. indicator
7)“Lint” (Lint Door) input L.E.D. indicator
8)“Main” (Main Door) input L.E.D. indicator
9)“Drum” (Basket [Tumbler]
10)“Sail” (Sail Switch) input L.E.D. indicator
11)“Burn” (Burner
12)“Flame” (Burner Control Failure) input L.E.D. indicator
13)“Power Supply” input L.E.D. indicator
45
