2.Electrical Service Specifications
ML-130 II Reversing, 3ø (GAS) ML-130 II Reversing, 3ø (STEAM)
ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)
IMPORTANT: 208 VAC AND 230/240 VAC ARE NOT THE SAME. When ordering, specify exact voltage.
NOTES: A . When fuses are used they must be dual element, time delay, current limiting, class RK1 or RK5 ONLY. Calculate/determine correct fuse value, by applying either local and/or National Electrical Codes to listed appliance amp draw data.
B. Circuit breakers are
C. Circuit breakers for
SERVICE |
| WIRE | APPROX. | MINIMUM | FUSING | CIRCUIT | ||||
PHASE | Dual Element | |||||||||
AMP DRAW | BREAKER | |||||||||
VOLTAGE | SERVICE | WIRE SIZE | Time Delay | |||||||
|
|
|
|
| ||||||
|
|
| 60 Hz | 50 Hz |
| 60 Hz | 50 Hz | 60 Hz | 50 Hz | |
208 | 3ø | 3 | 13.7 | 13.7 | * | 20 | 20 | 20 | 20 | |
|
|
|
|
|
|
|
|
|
| |
230/240 | 3ø | 3 | 12.5 | 12.8 | * | 20 | 20 | 20 | 20 | |
3ø | 3/4 | 7.3 | * | 15 | 15 | |||||
|
|
|
|
|
|
|
|
|
| |
416 | 3ø | 3/4 | 7.2 | * | 15 | 15 | ||||
|
|
|
|
|
|
|
|
|
| |
460 | 3ø | 3/4 | 7.2 | * | 15 | 15 | ||||
|
|
|
|
|
|
|
|
|
| |
480 | 3ø | 3/4 | 7.2 | * | 15 | 15 | ||||
|
|
|
|
|
|
|
|
|
| |
575 | 3ø | 3 | 6.3 | * | 15 | 15 | ||||
|
|
|
|
|
|
|
|
|
| |
*AWG Stranded Type Wire ... size wire as per National Electrical Code or local codes. (Motor lead type wire is recommended).
IMPORTANT: The dryer must be connected to the electric supply shown on the data label that is affixed to the left side panel/wall area behind the control door. In the case of 208 VAC or 230/240 VAC, the supply voltage must match the electric service specifications of the data label exactly.
WARNING: 208 VAC AND 230/240 VAC ARE NOT THE SAME. Any damage done to dryer components due to improper voltage connections will automatically VOID THE WARRANTY.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or obligation.
23
