10.Reversing Models Only - Basket (tumbler) dryer should never be operated with less than a 50 lb (22.67 kg) load dry weight. The size of the load will affect the
a.Microprocessor Models
1)Spin and dwell (stop) are not adjustable in the Automatic Mode and have been preprogrammed into the microprocessor controller (computer) for
2)Spin and dwell (stop) times are adjustable in the Manual (timed) Mode.
b.Dual Timer Models
Both dwell (stop) and basket (tumbler) spin time are adjustable. (Refer to the illustration on page 36.)
11.Check to ensure that ALL setscrews (i.e., basket [tumbler] drive, idler, etc.) are tight.
K.PREOPERATIONAL INSTRUCTIONS
COIN MODELS
1.Microprocessor Controller (Computer)
a.When the microprocessor controller (computer) is in the ready state, the liquid crystal display (L.C.D.) screen will display “Ready, Insert $XX.XX (amount) to Start”.
b.Insert coin(s). Once the correct “Amount to Start” has been inserted, the L.C.D. will display “Select Temperature”.
c.Select temperature by pressing “HI,” “MED,” or “LO.” The cycle will start and the L.C.D. will display the Dry Cycle selected and the remaining time.
d.The dryer will continue through the drying and cooling cycles, until the vended time has expired.
NOTE: To stop dryer, open main door or pressing the pause key. Continuation of the cycle will resume only after the door has been closed and any of the three (3) temperature selection is pressed.
e.Upon completion of the drying and cooling cycles, the tone (buzzer) will sound and the dryer will go into the
IMPORTANT: For more detailed information regarding the microprocessor controller (computer) on your dryer, refer to the microprocessor user’s manual included with the dryer.
34
