Panasonic VDR-D100 Select the paper size setting on Paper Size, When you stop printing halfway

With a printer (PictBridge) (VDR-D200 only)

5Press the MENU button to display the PictBridge menus.

6Select the date print setting on [ DATE PRINT].

≥If the printer is not capable of date printing, this setting is unavailable.

7 Select the paper size setting on [ PAPER SIZE].

STANDARD:	Size specific to the printer
4t5 INCH:	L size
5t7 INCH:	2L size
4t6 INCH:	Postcard size
A4:	A4 size

≥You cannot set paper sizes not supported on the printer.

With other products

8 Select the layout setting on [ PAGE LAYOUT].

STANDARD: Layout specific to the printer

: No frame print

: Frame print

≥You cannot set page layouts not supported on the printer.

9 Select [PRINT] # [YES] and press the joystick.

The pictures are printed.

≥Exit PictBridge by disconnecting the USB cable (supplied) after the pictures have been printed.

When you stop printing halfway

Move the joystick down.

A confirmation message appears. If [YES] is selected, the number of prints set is canceled and the screen returns to step 3. If [NO] is selected, all the settings are kept and the screen returns to step 3.

≥Avoid the following operations during printing. These operations disable proper printing.

–Disconnecting the USB cable

–Removing the SD card

–Switching the mode dial

–Turning off the power

≥Check the settings for the paper size, quality of print, etc. on the printer.

≥You cannot print pictures that cannot be played on this unit.

≥When the unit is connected directly to the printer, the DPOF settings cannot be used.

≥Connect the printer directly to this unit. Do not use a USB hub.

94

LSQT0969