16
LSQT0969
Before using
Parts identification and handling
28 Reset button [RESET] (l138)
29 LCD monitor (l18)
30 Mode select switch [AUTO/MANUAL/FOCUS]
(l55)
31 Speaker
32 Disc eject lever [DISC EJECT] (l27)
33 Disc/computer access lamp [ACCESS/PC]
(l27, 107)
34 Disc compartment (l27)
35 Grip belt (lbelow)
36 Shoulder strap fixture (lbelow)
Adjust the belt length so it fits your hand.
Adjust the belt length and the pad position.
1Flip the belt.
2Adjust the length.
3Fix the belt.
Put the strap through the fixture 1 and through
the stopper 2 so it will not come off. Extend part
3 by at least 2 cm (1z).
≥Put the opposite end of the strap through A and
attach it in the same way.
Due to limitations in LCD production
technology, there may be some tiny bright or
dark spots on the LCD monitor screen.
However, this is not a malfunction and does
not affect the recorded picture.
28 3
0
29 31
32
36
33 34 35
Using grip belt
(U.S.A. only)
When this unit is purchased, a sensor tag is attached to the grip belt.
Remove the tag before use.
1Flip the belt.
2Take off the tag.
3Fix the belt.
132
213
Shoulder strap fixture
3
2
1
A
D200(P_PC)eng.book 16 ページ ２００６年１月１８日　水曜日　午後５時４６分