Panasonic VDR-D100 operating instructions 138

Troubleshooting

Problem

Check points

		≥ Is this unit connected to a computer?
	The indication	# No operation can be performed on this unit when it is
		connected to a computer.
	disappears.
		≥ Turn off the power to this unit. If the power cannot be
	The screen is frozen.	turned off, press the RESET button, or remove the battery
	No operation can be	or AC adaptor and then reattach it. After that, turn on the
		power again. If normal operation is still not restored,
	performed.
		detach the power connected, and consult the dealer who
		you purchased this unit from.
		≥ The unit has automatically detected an
		error. Press the RESET button with the
		projecting part of the lens cap. This will
		restart the unit.
	“PUSH THE RESET	≥ If you do not press the RESET button,
		the power to this unit is turned off automatically about 1
	SWITCH.” is displayed.	minute later.
		≥ Even after you press the RESET button, the indication may
		still appear repeatedly. If so, this unit needs repair. Detach
		the power connected, and consult the dealer who you
		purchased this unit from. Do not attempt to repair the
		appliance by yourself.
	With a computer (Windows)
	Problem	Check points
		≥ Have you set this unit to the correct mode?
	Even if connected by the	# The unit is not recognized if it is set to recording mode.
		# Disconnect the USB cable, set [USB FUNCTION] to
	USB cable, this unit is not
		[PC CONNECT] and then reconnect the USB cable.
	recognized by the
		≥ Select another USB terminal on the computer.
	computer.
		≥ Check the operating environment. (l 98)
		≥ Turn on the power to this unit.
		≥ A disc other than a DVD-RAM or a DVD-RW (VR format) is
		loaded in the drive: DVD-MovieAlbumSE cannot be used
		for media other than DVD-RAM or DVD-RW (VR format).
Others	When	≥ If there are multiple drives, a drive other than this unit may
	DVD-MovieAlbumSE is	be selected. Click the [Preference] button in the dialog box,
	started, the [Mount	click the [Device setting] tab to choose the drive where the
	Information] dialog box	disc is loaded in the [Drive Select] column, and then click
	appears.	[OK].
		≥ If an error message appears even after a compatible disc is
		inserted, packet writing software may be installed in your
		computer. Uninstall the packet writing software.

138

LSQT0969